CE EN14683 TYPE IIR SURGICAL MASK WHITE BOX

Packing: 50pcs/box, 40boxes/carton, total: 2000pcs/carton

Artical No.YX011

Carton Size: 52*40*39cm

G.W.: 9kg

Certification: CE

Layer: 3 layer

Mask Size: 17.5*9.5cm

Type: earloop

Martiral: PP nonwoven, meltblown filter, activated carbon layer

3 LAYERS - These High quality three-ply masks are made of Meltblown cloth and Non-woven fabric which are proven to filter more effectively as well as provide a waterproof barrier not achieved in masks without the Meltblown cloth layer.

COMFORTABLE & ADJUSTABLE - Made with extra soft ear loops and a flexible metal nose bridge on the mask to provide a more comfortable and secure fit.

HYPOALLERGENIC - All masks are made with hypoallergenic materials to provide a comfortable feel for those with sensitive skin.

SIMPLE TO USE - Wash hands thoroughly prior to mask application. Keep blue side facing away from face and metal nose bridge on top. Wrap earloops around both ears. Press nose bridge to provide a tight seal at the bridge of nose and pull bottom to below chin.

What is a surgical face mask?

A surgical mask is a loose-fitting, disposable mask that’s rectangular in shape. The mask has elastic bands or ties that can be looped behind your ears or tied behind your head to hold it in place. A metal strip may be present at the top of the mask and can be pinched to fit the mask around your nose.

A properly worn three-ply surgical mask may help block transmission of large-particle microorganisms from droplets, sprays, splatters, and splashes. The mask may also reduce the likelihood of hand-to-face contact.

The surgical mask’s three-ply layers work as follows:

The outer layer repels water, blood, and other body fluids.

The middle layer filters certain pathogens.

The inner layer absorbs moisture and sweat from exhaled air.

However, the edges of surgical masks don’t form a tight seal around your nose or mouth. Therefore, they can’t filter out small airborne particles such as those transmitted by coughing or sneezing.  view products: https://www.facemask.net/product-list-surgical-mask.html

Steps to putting on a face mask

1.Before putting on the mask, wash your hands for at least 20 seconds with soap and water, or rub your hands together thoroughly with alcohol-based hand sanitizer.

2.Check for defects in the face mask, such as tears or broken loops.

3.Position the colored side of the mask outward.

4.If present, make sure the metallic strip is at the top of the mask and positioned against the bridge of your nose.

5.If the mask has:

Ear loops: Hold the mask by both ear loops and place one loop over each ear.

Ties: Hold the mask by the upper strings. Tie the upper strings in a secure bow near the crown of your head. Tie the bottom strings securely in a bow near the nape of your neck.

Dual elastic bands: Pull the top band over your head and position it against the crown of your head. Pull the bottom band over your head and position it against the nape of your neck.

6.Mold the bendable metallic upper strip to the shape of your nose by pinching and pressing down on it with your fingers.

7.Pull the bottom of the mask over your mouth and chin.

8.Be sure the mask fits snugly.

9.Don’t touch the mask once in position.

10.If the mask gets soiled or damp, replace it with a new one.

Steps to taking off a face mask

Before you take off the mask, wash your hands well or use hand sanitizer.

Avoid touching the mask itself, as it could be contaminated. Hold it by the loops, ties, or bands only.

Carefully remove the mask from your face once you:

unhook both ear loops, or 

untie the bottom bow first, followed by the top one, or

remove the bottom band first by lifting it over your head, then do the same with the top band

Holding the mask loops, ties, or bands, discard the mask by placing it in a covered trash bin.

After removing the mask, wash your hands thoroughly or use hand sanitizer.

More information please click here.