Automatic Flexo Printer Slotter Folder Gluer Stapper Line

General Features:

â–º Select the excellent materials and parts, all orders are made of the fine steel, with chrome plating and harden treatment;

â–º Driving gears are imported products, its grinding hardness is above 60 degrees;

â–º Adopted joint ring-free technology, to reduce abrasion and achieve precise printing result;

â–º Adopted gear lubricant auto self-balance device, to keep the lubricant levels in each unit uniform at all times;

â–º Independent computer control is able to store different orders, enable quick order changing;

â–º Each working unit is motorized for open and close actions, with warning alarm system to ensure safety;

â–º The distance adjustment of the feeding roll, press roll, and netted roll are achieved by electric control.

Components:

1. Feeding Unit 

â–º Variable frequency drive control for vacuum blower fan for increased or decreased vacuum suction to match different size cardboard.

â–º Feeding roll is made of two-layer rubber, inner layer is soft and outer layer is hard, this makes inner layer more flexible and surface more wear-resistant, and reduce the flute damage of the cardboard;

â–º Dust remove system with brush and segmented vacuum sheets cleaner; Self-locked system adopts for adjusting feeding rolls gap, motorized and PLC control of feeder side guides;

2. Printer Unit

â–º With four unit ceramic roller and doctor blade.

â–º Mounting roller with left and right both of side locking device,let the mounting position more accurately.

â–º Printing register is digitally controlled by motor and PLC

â–º Transverse register is also digital controlled by motor and PLC ±10mm

â–º Quick set and self locking pull collars.

3. Slotting Unit

â–º Ten drive shaft five blades slotting, an internal gear adjusts the height of the carton box and prevents the lubricating oil from spilling or leaking onto the cardboard

â–º The first pre-creasing, the cardboard not be damaged after prepressing.

â–º Upper creasing roll covered by anvil ring, so cardboard is not damaged easily.

â–º Slotting bosses move along liner lead rails and are driven by lead  screws for flexible and precise movement.

4. Die Cutting Unit

â–º With separate servo motor.

â–º Side to side oscillation of anvil drum(45mm)

â–º The die drum’s transverse movement can prolong the service life of anvil cover.

â–º Die-cutting register is digitally controlled by motor and PLC

â–º The die-cut cylinder lateral register is digitally controlled by motor and PLC,rang about±10mm

â–º Motorized caliper adjustment between anvil roll and die drum.

â–º Auto speed compensation system controlled by the independent motor can achieve the superb die accuracy.

5. Folder Gluer machine

The design and manufacture of automatic glue machine is in line with printing, slotting, folding, bonding and accumulation.It has the ability to carry, apply glue, fold, and form several layers of automatic.Adopt PLC control, touch screen operation and pre-storage and management orders.Its high speed production capacity, fast changing orders and good stability can satisfy our carton customers' shorter and shorter delivery cycle requirements.

6. Automatic Bundler Machine

Technical Parameters: